Driveway Cleaning
Lift oil stains, tyre marks, mould and grime from concrete, exposed aggregate and paved driveways across Rockingham and surrounds. Call Rockingham Pressure Cleaning Pros today!
Learn More →
Soft-wash roof cleaning for tile and Colorbond roofs that removes moss, lichen and black streaks without damaging the roof. Call Rockingham Pressure Cleaning Pros today!
Request a Free Quote
Living near the coast in Rockingham is hard on a roof. The afternoon sea breeze carries a fine salt mist inland. That mist settles on concrete tiles, terracotta and metal sheeting along with sand and dust, and it gives lichen and black mould something to grip. Over a few winters you start to see dark streaks running down the tiles, orange and grey lichen spots on the ridge capping, and moss building up in the valleys on the shady side of the house.
Most tile roofs get a soft wash. We apply a biocide solution at low pressure, let it soak into the lichen and mould spores, then rinse it off. For heavily coated concrete tiles we may follow up with a controlled pressure clean using the right nozzle and a careful working angle, so we lift the growth without stripping the tile surface or forcing water under the laps. Glazed terracotta and metal roofs are rinsed at lower pressure. On metal roofs we focus on washing off salt and grime that can sit around fasteners and overlaps.
A typical job looks like this. You're getting the house ready to sell in Baldivis or Kwinana and the roof looks tired from the street. Or the gutters on your older Safety Bay home keep filling with black sludge every winter. Either way, cleaning the roof clears the growth that holds moisture against the tiles. It also stops that slurry from washing down onto your walls and paths. Plenty of customers book house washing or driveway cleaning for the same visit so the whole property finishes up looking even.
From inspection and soft wash to gutter flush and clean-up
We get up on the roof and check the tile type, pitch, ridge capping and any cracked or loose tiles before we spray anything. We disconnect rainwater tank downpipes, cover sensitive garden beds and move outdoor furniture clear of the run-off zone.
We apply a biocide solution at low pressure across the whole roof, paying extra attention to lichen spots, mould streaks and moss in the valleys. The solution needs dwell time to soak into the growth and break down its roots, so we don't rush this stage.
Once the growth has softened, we rinse it off from the ridge down, working with the lap of the tiles so water doesn't push underneath. Heavily coated concrete tiles may get a controlled pressure clean. Terracotta and metal roofs stay on a gentler rinse.
We flush the gutters and valleys to clear the slurry the clean leaves behind, then rinse down walls, windows and paths that caught any run-off. Downpipes are reconnected and we walk you through any cracked tiles or tired pointing we spotted.
Practical results you'll notice after the first winter
Lichen and moss act like a sponge and keep tiles damp long after winter rain stops. Removing the growth lets the roof dry out properly. That helps protect the tile surface and the ridge pointing from breaking down early.
A roof covered in organic growth keeps shedding grit and sludge into your gutters and downpipes every time it rains. Once that's cleared, gutters block less often. If you run a rainwater tank, the water coming off the roof is carrying less debris.
The roof is one of the first things a buyer or tenant sees from the kerb. Streaked, blackened tiles make a well-kept home look neglected. A clean roof helps listing photos and inspections show the property as it really is.
Salt spray, wind-blown sand and damp winters are normal for roofs from Safety Bay to Kwinana. We know where lichen builds up, how salt sits on metal roofs and which surfaces need a softer touch.
Concrete tiles, glazed terracotta and metal sheeting each get a different approach. We choose between soft wash, rinse and controlled pressure for each roof instead of blasting everything the same way.
We set up harnesses and fall protection before anyone works on a pitched or two-storey roof. We step on tiles carefully to avoid cracking them while we work.
While we're up there, we take note of cracked tiles, loose ridge capping and crumbling pointing. You get a clear rundown afterwards, so you can sort repairs with a roofer before winter rain finds the gaps.
Common questions answered
It depends on your roof's shade, its tile type and how close you are to the beach. Homes near the coast or under big trees grow lichen and mould faster, so they usually need it sooner than an inland home in full sun. We'll look at the roof and give you an honest view on whether it needs doing now or can wait.
Done badly, it can. High pressure at the wrong angle can strip the surface off concrete tiles or push water under the laps. That's why most roofs get a low-pressure soft wash first, and we only use controlled pressure on concrete tiles that can handle it, working downward with the tiles.
No. Pressure cleaning asbestos cement roofing is prohibited in Western Australia because it can release fibres into the air and across your yard. If your home is older and you're not sure what the roof is made of, tell us when you request a quote and we'll check before any work is booked.
The main factors are roof size, pitch, whether it's single or two-storey, the tile or sheeting type and how heavy the growth is. Access matters too, like tight side paths or a pool close to the eaves. We quote after seeing the roof so the price matches the actual job.
We disconnect tank downpipes before we start so treated water never goes into your tank, and we reconnect them once the roof has been rinsed. We also wet down and cover sensitive plants near the drip line. Let us know about any fish ponds or veggie patches when you book.
We provide Roof Cleaning throughout Rockingham, WA and surrounding suburbs.
Don't see your area? Contact us to check if we service your location!
View All Areas